Subject:
|
Re: brickos 090 problem no program download with CONF_LNP_FAST
|
Newsgroups:
|
lugnet.robotics.rcx.legos
|
Date:
|
Tue, 29 Apr 2008 15:18:58 GMT
|
Viewed:
|
26789 times
|
| |
|
|
Hello Powolny,
>
> I build allready a bluetooth connection between the pc and the rcx . The
> bluetooth module (BTM-222) supports the spp serial protocoll only
for 4800 or
> higher baudrates. But it is cheap in comparsion to other ones.
Costs about 14
> Euros.
sounds interesting...
> Now i tried to compile brickos 090 with the
>
> #define CONF_LNP_FAST //!< enable 4800 bps LNP
>
> option in
> boot/config.h
> [...]
> util/dll-src/config.h
>
> and recompile the whole stuff
>
> but no success too. Same error with download the program with dll
You're trying this still with standard hardware and standard dll-src,
right? Otherwise, check that you use the right baud-rate and parity
settings (4800, no parity bit, 1 start, 1 stop bit).
In my experience the IR-communication doesn't work that well,
especially in 4800 baud mode. It is mainly the PC that does not
understand the RCX correctly. Try running dll-src with "-v" to get
more information. Sometimes the PC receives part of the reply but
there are some broken or missing bytes so the reply is just ignored.
I think LNP_FAST mode is not tested very often. There may also be a
stupid bug in brickOS code that prevents communication.
Regards,
Jochen Hoenicke
--
Jochen Hoenicke, http://hoenicke.ath.cx/rcx/
|
|
Message has 1 Reply:
Message is in Reply To:
9 Messages in This Thread:
   
- Entire Thread on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
This Message and its Replies on One Page:
- Nested:
All | Brief | Compact | Dots
Linear:
All | Brief | Compact
|
|
|
|
